1. Home > 
  2. Dog Supplies > 
  3. Grooming Supplies > 
  4. Hair Trimmers & Scissors > 
  5. Andis® Electric Clippers > 
  6. Andis AGC 2- Speed Clipper with #10 Blade


Andis AGC 2- Speed Clipper with #10 Blade

Item: AD22340
1. Select product:


Andis AGC 2- Speed Clipper This clipper is one of the most popular professional clippers we sell. Anyone who has been burned by a cheap-o dog clipper at the local discount store will appreciate the smooth, fast cut and easy maintenance.

  • Powerful rotary motor. 2700 & 3400 spm
  • Versatile. 2 Speeds at the touch of a button.
  • Higher speeds mean smoother finishes and faster ruffs.
  • Sealed motor. No fans or air vents to clog or need cleaning.
  • Quiet operation for sensitive animals.
  • Smaller grip diameter for feminine hands
  • Locking blade hinge keeps blade secure
  • Break-resistant housing takes more punishment
  • Extra long, 14' heavy duty cord
  • Includes #10 UltraEdge blade
  • Detachable blades. Uses all professional UltraEdge and CeramicEdge blades as well as Oster A-5 Blades
  • Useful Information

    IMPORTANT SAFEGUARDS: When using an electrical appliance, basic precautions should always be followed, including: Red all instructions before using the Andis Clipper.

      DANGER: To reduce the risk of electric shock:
      1. Do not reach for an appliance that has fallen into water. Unplug immediately.
      2. Do not use while bathing or in a shower.
      3. Do not place or stor appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.
      4. Always unplug this appliance from the electrical outlet immediately after using.
      5. Unplug this appliance before cleaning, removing or assembling parts.

      WARNING: To reduce the risk of burns, fire electric shock, or injury to persons:
      1. An appliance should never be left unattended when plugged in.
      2. Close supervision is necessary when this appliance is used by, on or near children or individuals with certain disabilities.
      3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by Andis.
      4. Never operate this appliance if it has been dropped or damaged, or dropped into water. Return the appliance to an Andis Authorized Service Station for examination and repair.
      5. Keep the cord away from heated surfaces.
      6. Never drop or insert any object into any opening.
      7. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
      8. Do not us ethis appliance with a damaged or broken blade or comb, as injury to the skin may occur.
      9. To disconnect turn control to "off" then remove plug from outlet.
      10. WARNING: During use, do not place or leave appliance where it may be (1) damaged by an animal or (2) exposed to the weather.

    To reduce the rish of electric shock, this appliance has a polarized plug (one blade is wider that the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. if it still does not fit, contact aqualified electrician to install the proper outlet. Do not change the plug in any way.

    Please read the following instructions before using your new Andis clipper. Give it the care that a fine precision built instrument deserves and it will give you years of service. Plug cord into electrical outlet, operate 120 volt, 60 cycle AC electrical current or as noted on unit.

    Your Andis clipper comes with normal and high speed operation. Use the normal setting (setting #1) for most cutting needs. Use the high speed setting (setting #2) for cutting through heavy hair. To start clipper move switch button by pressing down on the lock mechanism and moving to the #1 or #2 position. To stop, press down on the lock mechanism and move switch button back to original position. After using your Andis clipper, rewrap cord, and store in a safe place.

    To remove blade set, first make sure your clipper motor is switched "OFF". Push blade release mechanism under blade hinge. While holding down the blade release mechanism, push down on blade, then gently pull the blade forward, and slide it off the blade hinge. If your blade hinge should snap closed and is flush with the clipper, use a small standard screwdrive to pry the tongue of the hinge out.

    NOTE: Hair may accumulate in the front cavity of the housing under the blade. If this happens, you can clean out the hair by brushing out the cavity with a small brush or an old toothbrush while the blade is off the clipper.

    To replace or change your blade set, slide the blade bracket onto the hinge of the clipper and with the clipper turned "ON", push the blade towards the clipper to lock into position.

    Due to the hign speed nature of Andis clippers, please check for blade heat often, especially on close cutting blades. If blades are too hot, dip the blades only into Andis Blade Care Plus or apply Andis Cool Care Plus and then Andis Clipper Oil. If you have a detachable blade unit, you can change your blade in order to maintain a comfortable temperature; using multiple blades of the same size is popular among groomers.

    Blades should be oiled before, during, and after each use. If your clipper blades leave streaks or slow down, it's a sure sign blades need oil. Place a few drops of oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insuufficient oil for good lubrication, but are an excellent clipper balde coolant. Always replace broken or nicked blades to prevent injury. You can clean the excess hair from your blades by using a small brush or worn out toothbrush. To clean the blades, we suggest to immerse the blades only into a shallow pan of Andis Clipper Oil, while the clipper is running. Any excess hair and dirt that has accumulated between the blades should come out. After cleaning, turn your clipper off and dry blades with a clean dry cloth and start clipping again.

    If upon cleaning your blades you find that the blades will still not cut, there may be a few fine pieces of hair trapped between the upper and lower blade. If this happens, you will need to snap the blade off the clipper. Proceed to slide the upper blade to one side, without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surface between the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring. Now slide the upper blade to the opposite side of the lower blade and repeat this process. After completing this procedure, slide the upper blade, centering it over the lower blade. Handle or store your Andis Clipper with the blades down so excess oil will not run into the clipper case.

    If your clipper blades no longer cut properly (be sure to try more than one balde, sicne the balde currently being used may be dull), it could be that youur balde drive asssembly needs replacement.

      1. Remove blade set.
      2. Remove drive cap.
      3. Remove blade drive mounting screws.
      4. NOTE: Before removing blade drive assembly, note the way it is positioned (this will help you in reassembly). Remove blade drive assembly.
      5. Drive bearing should be at its lowest position, if not, move it with your finger to lowest position.
      6. Put on new drive assembly, align screw holes and press down.
      7. Reassemble balde drive by mounting screws.
      8. Replace drive cap.
      9. Replace blade.

    Customer Reviews

    Questions and Answers

    There are no questions or answers for this item.

    Andis ProClip AG2 Pet ClipperAndis ProClip AG2 Pet ClipperReg price: $233.99
    Sale price: $143.99
    Andis TCX All-In-One Clipper/TrimmerAndis TCX All-In-One Clipper/TrimmerReg price: $77.99
    Sale price: $59.99
    Andis ProClip ION - Cord/Cordless TrimmerAndis ProClip ION - Cord/Cordless TrimmerReg price: $29.99
    Sale price: $22.99
    Andis AGP Super 2-Speed Pet ClipperAndis AGP Super 2-Speed Pet ClipperReg price: $259.99
    Sale price: $159.99
    CALL IN YOUR ORDER 800.889.8967

    Stay in touch. Friends fur-ever!

    Terms and Conditions

    You have to agree on terms in order to proceed to the subscription.