Bergan Automatic Waterer Bowl fulfilling your pets’ outside watering needs, the Auto-Water keeps the bowl full. Connect it to a standard garden hose and let it go. The internal float stops the water flowing when the bowl is full and automatically fills it when low, never wasting water. Made of durable plastic, keep it on the floor or mounted to a wall.
Internal float stops the water flowing when the bowl is full and automatically fills it when low
Connects to a garden hose for a continuous supply of fresh water
Made of durable plastic
Use on ground/floor or mount on a wall
Hold approximately 6 cups of water
Select a level surface near an exterior faucet.
Connect garden hose and tighten.
Turn faucet on and allow dish to fill.
To adjust water level, remove lid to access float valve. Loosen plastic nut and adjust float up or down. Then, retighten plastic nut.
For aggressive pets, secure Auto-Wata with floor or wall mounting tabs on the rear of the dish.
Hose should be unhooked when temperature dips below freezing. Never leave your pet unattended for more than 8 hours.
Disruption of water supply to the hose will result in your pet being without drinking water.
For added convenience, fasten a "Y" connector (not included) to your water supply and connect the Auto-Wata to a second hose.
Not recommended for indoor use.
†Capacity is calculated by total volume. When using container, choose a capacity greater than what you need to prevent overfilling and spills.
Questions and Answers
There are no questions or answers for this item.