Description
Useful Information
Directions:
Timer Usage:
* Your Reef Capable LED Lighting System is preprogrammed out of the box. Push and twist DC Jack into DC Socket to ensure water resistant connection.
The cycle is:Blue LEDs only at 9:00 AM
Blue and White LEDs at 10:00 AM
Blue LEDs only (White LEDs OFF) at 8:00 PM
All LEDs OFF at 10:00 PM
After the initial cycle, the default clock position will be at 3:00 PM. Note: In the event there is a loss of power, the system will reset to these default settings.
To Change the Clock, please follow these steps:
Press and hold both the Blue and White Buttons at the same time for three seconds.
The time on the Clock will begin to flash.
Press the White Button to set the Hour and press the Blue Button to set the Minute.
After five seconds of inactivity the Clock will exit the Set Mode.
To Change the Light Programming, please follow these steps:
Blue LEDs ON and OFF Cycle:
Press and hold the Blue Button for three seconds.
The Timer will display "ON". You are now setting the time that the Blue LEDs will turn ON.
Press the White Button to set the Hour and the Blue Button to set the Minute.
After five seconds of inactivity the Timer will display "OFF". You are now setting the time when the Blue LEDs will turn OFF.
Press the White Button to set the Hour and the Blue Button to set the minute.
After five seconds of inactivity, the system will exit Set Mode and return to the Clock.
White LEDs ON and OFF Cycle: Press and hold the White Button for three seconds.
The Timer will read "ON". You are now setting the time the White LEDs will turn ON.
Press the White Button to set the Hour and the Blue Button to set the Minute.
After five seconds of inactivity, the Timer will display "OFF". You are now setting the time the White LEDs will turn OFF.
Press the White Button to set the Hour and the Blue Button to set the Minute.
After five seconds of inactivity, the system will exit Set mode and return to the Clock.
* You can manually override the Lighting Cycle at any time with a simple, quick press (one second) of the White/Blue Button to turn the White/Blue LEDs ON or OFF. This action will not reset your preset lighting cycle.
Timer Usage:
* Your Reef Capable LED Lighting System is preprogrammed out of the box. Push and twist DC Jack into DC Socket to ensure water resistant connection.
The cycle is:
After the initial cycle, the default clock position will be at 3:00 PM. Note: In the event there is a loss of power, the system will reset to these default settings.
To Change the Clock, please follow these steps:
To Change the Light Programming, please follow these steps:
Blue LEDs ON and OFF Cycle:
White LEDs ON and OFF Cycle:
* You can manually override the Lighting Cycle at any time with a simple, quick press (one second) of the White/Blue Button to turn the White/Blue LEDs ON or OFF. This action will not reset your preset lighting cycle.